How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add an additional key. It requires dealer assistance using a handheld computer called Tech-2. Then a new key and transponder must be purchased and then programmed to the car.
Make sure to rotate your keys in order to prevent one from wearing out quicker than the other. This will also keep your keys in good condition.
Replacement Case
The new key fobs do not look like the old Saab keys. They're equipped with electronic devices that make them difficult to copy. This has made stealing cars significantly more difficult than 20 years ago. It also makes it more expensive to replace lost keys.
Every owner of a Saab 9-3 should have at minimum two working keys. If one is lost, it is expensive to purchase a new one for the car since it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 for this.
There are ways to reduce these high costs. Some parts suppliers will use the code of an extra key to cut a new metal blade for a fraction of what the dealer charges. The key, however, must be the same as the original one in order to function in your vehicle.
Follow these steps to replace the case. You will need a flathead screwdriver as well as some patience. Using the screwdriver, slowly break the plastic and separate the emergency key from the case. Once the case is open take out all electronic components and place them in the new case. Insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a low-cost part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd shows how to replace the remote fob battery with only four steps. This guide should work with any modern saab-type key fob, however the procedure might differ slightly.
This button is usually placed next to the Saab logo on the back of the fob. It's usually just below the Saab logo on the back of the fob. Then, use a flathead screwdriver into the small hole of this button. This should be enough to let the fob case open in order to change the battery.
Once the new CR1632 battery is installed it is possible to reassemble the remote key fob. You can then program it to your car. The entire process shouldn't take more than an hour. It's a very easy process that does not require any special equipment.
If you lose a key, the procedure will be a bit more involved however it can be completed. The dealer must find the VIN number of the car and then request a replacement key blade and a TWICE module with the proper unique code. After that, they will need to cut the replacement key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob is a device that locks and unlocks your car, it's got batteries inside. They have a limited life span and eventually die. This is a typical issue that occurs with all vehicles and the good thing is that you can change the batteries in most key fobs without having to replace the entire case. saab 9-3 key fob programming sells replacement fobs that have all the electronic components installed. You can simply remove the case and replace the batteries. It is important to keep in mind that you'll need to take out the emergency key first, and you can do this by inserting a small flathead screwdriver into the slot in the middle of the case. The case will split once you turn the screwdriver around it.
If you're looking to replace your keys, keep a spare available. This can save you a lot of money. If you have an extra key, ask the dealer to cut it and program it for your car. This is less expensive than purchasing a new fob.
If you don't have a spare one, you can add an additional key to your car, but it requires a lot of research and effort. It costs around a hundred dollars to get an additional car key. The computer of the car also needs to be programmed. This can be accomplished by a professional, however it's an expensive option for most owners.
Replacement Ignition
Unlike earlier Saab automobiles, the current SAAB 9-3 models are equipped with an extremely sophisticated alarm system that is built on a key code. If you lose your only key, it can be expensive to add another one since the car must have a specific computer installed and be programmed to accept a new key. Even a dealer can charge hundreds of dollars to program an entirely new key, when they are not able to complete the task.
Dealers will charge you a premium to replace your car computer (also known as the CIM or SAAB twice) If you lose your only functioning key. We can reprogram the EEPROM of your car's computer so that it is ready for an additional key. This will save you more than 50% of the cost you pay the dealer.
If you have owned a SAAB 9-3 for many years you are aware that the ignition keys aren't very durable. If the ignition key you have isn't functioning properly, it is time to think about replacing it. They can become sticky and the buttons can fall off. Fortunately, replacing the ignition key isn't as difficult as it sounds, and it is fairly easy to do using the appropriate tools.
